How to properly install and maintain Deep Groove Ball Bearing to extend its service life?

Proper installation and maintenance of Deep Groove Ball Bearings is critical to extending their service life. Here are some suggestions:
1. Installation steps:
Prepare the inner and outer rings, making sure the inner ring is placed aside for subsequent installation.
Put in the steel balls, making sure the number is correct and the quality of the balls meets the requirements of the bearing.
Use a ball separator with small claws to evenly separate the steel balls, ensuring they are evenly distributed inside the bearing.
Install the cage and rivet the two cages together. Cage riveting is a critical step, ensuring they fit tightly to provide stable support and maintain the position of the steel balls.
Check the installed bearing to make sure it rotates freely and that there are no unusual noises or vibrations.
2. Maintenance suggestions:
Clean bearings regularly to remove dust, dirt and other impurities. Use appropriate cleaners and tools and avoid chemicals that are harmful to bearing materials.
Check bearing lubrication. Make sure bearings have proper lubrication to reduce friction and wear. Use recommended lubricants and follow lubricant change intervals.
Check the bearing seal. Make sure the bearing seals are intact to prevent dust, moisture, and other contaminants from getting inside the bearing.
Regularly check the operating status of the bearings. If abnormal noise, vibration or temperature increase is found in the bearing, stop the machine immediately for inspection and find out the cause of the problem.
Follow the bearing life and replacement intervals. Replace bearings regularly according to their usage and manufacturer's recommendations to ensure normal operation of the equipment and extend its service life.